If the flange joint you are working on has an access gap of 6.0mm then our range of SW and SWi flange spreading wedges are suitable. If the flange joint you are working on has an access gap of 2.0mm and is of a smaller diameter and lower pressure then our MG7TM spreading wedges are suitable.
A simple solution to hydraulically spreading flange joints with a minimum access gap of 6.0mm (0.25“).
Models: SWi20/25TE, SWi20/25TI, SWi5TE, SW15TE
Variants: External Hydraulic and Integral Hydraulic
Access Gap Range: 4mm – 103.5mm
SW Mechanical Series
A simple solution to mechanically spread flange joints with a minimum access gap of 6.0mm (0.25“). It features a swivel handle, no finger pinch-points and safety lanyard as standard.
Models: SWi12/14TM, SW9TM
Variants: Mechanical
Access Gap Range: 6mm – 103.5mm
Mini-Gap Flange Spreader
For use on smaller, lower pressure flange joints with a minimum access gap of 2.0mm (0.08“). If the flange joint you are working on has an access gap of 2.0mm and is of a smaller diameter and lower pressure then click image on left. For use on smaller, lower pressure flange joints with a minimum access gap of 2.0mm (0.08“). The tool will provide 6.8T (68kN) of spreading force.
Models: MG7TM
Variants: NA
Access Gap: 2mm – 27mm