Call / WhatsApp
hydraulic torque pumps

Hydraulic Torque Wrench Pump

Remote Control Pendant with two push buttons of 24 V DC supply Visual Oil Level Gauge Safety Interlock: If the power pack is kept running idle without pressurizing for more than 60 seconds, the power pack is switched OFF automatically. To start the Power Pack again, the STOP button (Push Button 2) has to be pressed once before the START button (Push Button 1) is pressed. Temperature Interlock: If the temperature of the hydraulic oil rises above 800 C, power pack switches off automatically.

Related Documents 

Operation & Maintenance Manual


  • Mains Voltage: 1 ~ 230 V 50 Hz
  • Solenoid Voltage: 230 VAC
  • Main Consumption: 7.20 A
  • Motor Capacity: 1.10 KW
  • Protected According to: IP 54
  • Nominal Pressure: 10-700 Bar
  • Flow: 1st Stage: ~9.7 lpm(70 Bar)
  • 2nd Stage : ~1 lpm (700 Bar)
  • Tank Volume: 6 Litre
  • Usable Volume: 3 Litre
  • Oil Type : ISO VG 32 - 68
  • Weight ready for use: 38 Kg without oil

Enquire Now

People Also Ask

- A torquing pump serves the purpose of providing hydraulic pressure to hydraulic torque wrenches, enabling controlled and precise tightening of bolts.

- The torque requirement for a pump is not applicable

instead, pumps are designed to generate hydraulic pressure to operate torque wrenches efficiently.

- Torque calculation is not relevant for torquing pumps. The focus is on generating hydraulic pressure, measured in pounds per square inch (psi), to drive torque wrenches.

Bolting Solutions enquiry and chat

Let's Chat